Adresse Lehrstuhl für Thermische Verfahrenstechnik

Egerlandstr. 3
D-91058 Erlangen
Germany
Telefon +49 (0)9131 85-28596 / -27210 Fax +49 (0)9131 85-27441 E-Mail  

Map

GPS position

Arrival by car

Arrival by train

Arrival by plane


Map



GPS position

49° 34' 33 N, 11° 01' 46 E, 294m a.s.l.

Arrival by car

The institute can be reached conventiently via highways:

  • A3 Wüburg - Passau
  • A73 Nüberg - Bamberg
  • Bundesstraße B4 Nürnberg - Erlangen

Driving directions (see also map above):

  • Leave highway A3 at exit Tennenlohe
  • Take B4 towards Erlangen
  • Leave B4 after 2km at exit Universität Südgelände and leave the roundabout towards Erlangen
  • You are now approaching the campus on Kurt-Schumacher-Straße
  • Turn left on the second junction into Erwin-Rommel-Straße, and turn again left at the next junction into Egerlandstraße
  • After 100m you reach the Institute. The parking lot is located on the left at the across the bus station

Arrival by train

  • Intercity trains from Hamburg / Frankfurt / Regensburg / Marktredwitz: Change trains at Nürnberg main station and take Regionalbahn / Regionalexpress / Intercity towards Erlangen Hbf.
  • Intercity trains from Berlin / Magdeburg / Halle / Leipzig / München stop at Erlangen main station.

From the main station you may take a taxi to the Institute (15 min., approx. 10,- Euro) or proceed by bus:

  • Line 287: direction Sebaldussiedlung until stop Technische Fakultät
  • Lines 30 or 30E: Leave at stop Erlangen-Süd. Take the footbridge and walk straight down the Egerlandstraße (approx. 300m).

Arrival by plane

There are international and national flights to Nuremberg airport (NUE).

From the airport you may take a taxi (20min, approx. 25 Euro) or a bus (30min). For the latter, check at www.vgn.de (at "Fahrplanauskunft", fill "von" field with N Airport and "nach" field with Erlangen Sued, then click "abfragen" at bottom of page).